we have a spa i think its a coleman and it has the buttons for the high and low jets, but no on/off button. I also notice the power turns totally off so we have to go to the main power box and flip the switch. Is there another way of turning it off?

I’ve moved into a house where the previous owners have (stupidly) painted the spa bath, and as a result the jets are painted shut. Does anyone know how to fix this, or what I shouldn’t be doing to fix it?
The taps and plug work fine, it’s just the jets that are shut.
Help!

we got a plastic spa tub but never use it. Guess what? One day when I cleaned that room and it cracked with a cleft about 10 inches long. Geez.. what a waste and it turned out be to a crap… Can anyone know how to fix it and what kind of fillament we can fill the cleft up without leeking when the spa tub is filled with water…

I have asked this question twice without getting a good answer so far-I am considering buying a spa/hot tub. I do not want to spend too much money to buy one.
There are so many different styles of spa/hot tubs. What are things that I am looking for in a quality spa/hot tub? I am concern about spending a lot of money for one that may lead to major repairs in near future.
Also-can someone explain to me what to look for in spa/hot tub to avoid dry rot and not to have the pumps & motor go bad.
How much horsepower is good to have to be considered a good buy?
Any advise would be greatly appreciated….

I am in the process of acquiring a 7′ redwood framed Coast Spa. It currently sits on a cement slab and there is a deck built closely around it about 2′ off the ground and 1′ from the top. Is there a way to disassemble it and pull the fiberglass tub up separtely and then move the plumbing frame? Will the redwood surrounding come off around it so the tub can be moved separtely and with less weight? I am pretty much at a loss as to how to go about moving this unit. I would prefer to have some thoughts and coaching before I make the wrong move. Any suggestions will be greatly appreciated.

My spa is displaying the letters fl on the digital display. This just happened yesterday and I have tried unplugging it and it just goes back to fl. Not sure what this means, I hope someone can help me ot with an answer!

I have a spa, some say jacuzzi, some say hot tub. But anyway, how often shoudl we change out the water. We test it and treat it all the time, and it is kept clean and sanitary, but is there a recommended length of time to keep the same water in the spa? Thank You

Our pool and spa have shared equipment. The spa sits above the pool deck. The spa is draining after I fill it: not right away, and not when the spa pump is running. However, after 12 hours (which included the pool pump running) the spa is 4/5ths drained. The valves are electronic and seem to be changing position properly. Any answers?

We know what the difference is in HOW they work but not in why. We are researching tubs for a bathroom remodel, but no one seems to know why you would choose a whirlpool (swirls the water around) or an air spa (blows air into full tub). Anyone know what the heck the difference is?

The spa was very, very dirty when we moved in – our Landlady said she would clean it. She drained out the water, wiped it down with a towel, then refilled it with water. Needless to say, it’s still pretty dirty. Is this the appropriate way to clean a spa? And how do we maintain the cleanliness once it is clean?